Relative adjustment plug-in

Do you want to add a little extra brightness or ... to multiple already edited photos: "Relative adjustment" is your choice.
Do you want to apply a preset stronger of softer: "Percentage adjustment" is your choice.
Do you want to apply develop changes only on new virtual copies: "Appy to Virtual copy" is your choice.
The "Relative adjustment" plug-in can do all and even combine these functions.

YouTube demo
What's unique about Relative adjustments
Sample videos
Features
Use cases
How it works
Why should I use it
Screenshots & options
Known errors

Resources

YouTube demo

What's unique about Relative adjustments

A little example will explain the need and the solution.
Say you developed a bunch of photos. Each photo having it's unique develop adjustments. Now you want to brightens them all a little. Being in the develop module, if you select those photos and move for example the Exposure (or another) slider, all photos get exactly the same Exposure settings. But that's not what you want. You want to add to the current setting of the photo. Jared Platt discussed the problem in this video.
Ok, in the Library module you can use the Quick Develop settings, but you have no control how much you add, you only have a few develop tools and you can not use presets.

With the Lightroom Relative adjustment plug-in you can apply develop adjustments relative to the current photo settings. So it adds to the photo settings instead of overwriting them.
It doesn't matter that the selected photos have completely different settings, all settings are applied relatively to the current one.
With this plug-in you can boost the Exposure for example with 0.10 on all selected photos.

See section "Why would I use relative adjustments?" for an explanation of the problems of Lightrooms preset system and how this plug-in solves those problems.

But there is more, you can also apply a preset absolute like Lightroom does. With "Create Virtual copy" setting on, you can create Virtual copy and then apply the develop adjustments. With the factor you can specify how strong/soft you would like the preset have applied.See the Features section below for more info.

See the section "How it works below".
See the screenshots, because a picture is worth a thousand words.

Sample videos

How to increase the Exposure with 0.40

How to increase the Exposure and Shadows with 50 percent:

Features

Apply relative or absolute develop settings
- Absolute
  Default Lightroom behavior
  All selected photos get the same develop settings of the preset.
  For example if the preset contains Exposure = 0.15; all selected photos will have 0.15, despite their current value.
- Relative
  All the develop settings will be added/subtracted to the current settings of the photo instead of overwriting them.
Percentage adjustment
By changing the percentage the preset can be applied stronger or softer. All develop settings in the preset are recalculated with a percentage.
Create Virtual copy and apply preset in one step (LR 5 only)
Selecting this option will first create a Virtual Copy and then apply the changes, leaving the original photo untouched.
Working with master files this feature allows to apply a preset on a series of photos and get the changes in a virtual copy.
2 options for applying relative adjustments:
- Relative with values
  All the develop settings will be added/subtracted with the number in the preset.
  For example add 0.10 Exposure to the selected photos.
- Relative with percentage
  interprets the values as a percentages to be added to the current photo setting.
  For example add 10% extra Exposure to the selected photos.
Simulation mode
This option reports how the photos would be affected by the preset, yet does not apply the preset.
Ignore difference in Process version
By default the plug-in will not process an image when the image has a different Process version than specified in the preset!
Checking this option allows you to overrule the default and apply the preset although the Process Version of the preset and the photo are different.
Be aware: the when checking this option the Process Version of the photo is not changed!
Default: off

Inverse calculation when original value is negative.
To clarify this feature see table below.

Inverse calculation on/off	Setting	Original value	Preset	New value
Off (default)	Exposure	1.0	-0.2	0.8
	Exposure	-1.0	-0.2	-1.2
On	Exposure	1.0	-0.2	0.8
	Exposure	-1.0	-0.2	-0.8

Use cases

Soft proofing.
Soft proofing lets you temporarily simulate how an image will appear on another device, such as a printer, by using only a computer monitor. Often you have to make adjustments. The good thing is that there is a logic in the adjustments you make with soft proofing. Soft proof a couple of images and you might see a trend. Now you have a head start if you collect these adjustments in a preset and apply it to all images you want to print with this printer / paper combination.
White balance adjustments on multiple images
See this real topic in Lightroom forums. The question was: "Is there a way with LR that I could select the 1000 photos and adjust the white balance temp by -300K and the tint by -5?".
Yes, no you can with this Relative adjustement plug-in.
Another question on the forum: "How to apply presets RELATIVE to you pictures? (exposure)".
Apply a preset stronger or softer
Use the plug-in, choose apply the preset "absolute" as Lightroom default does, and experiment with a lower factor.
Create Virtual copy and apply preset in one action.
The plug-in will create a Virtual copy first and then apply the preset.
Create a master photo and apply preset for special derivative photos.
Default when you apply a preset on your master photos, there is a great change that it unwillingly overwrite settings of the master.
With relative adjustments you can create a master photo and then create and apply presets that take the settings of the master as a start.

How it works

First, this plug-in works with Lightroom presets.
A preset can contain one or a group of settings. For the plug-in it does not matter.
This is the power of the plug-in that you can apply presets relative, absolute and with a factor. Direct or on Virtual copy.

The plug-in works very simple, see screenshots below

Select the preset you want to apply
Select the "Apply mode": relative or absolute.
Optionally select
1. With the factor how strong the preset should be applied. 100% is normal
2. If a virtual copy should be made first

Creating a preset yourself is very ease, see the resource section below. The nice thing about presets is that you can group the desired develop settings in one preset and use them again and again.

You can create a preset in 15 - 30 seconds, see sample YouTube video

Note on setting the percentage adjustments

Develop settings that have a range of -100 to +100 or more, you can set the percentage as the value.
For example Shadows 50%, you create a preset with Shadows with the value of 50, see example below.

Some settings like Exposure have a smaller range. Exposure can be adjusted from -5 to +5.
In this case you set the percentage as decimal value. For example for Exposure 50% you create a preset with Exposure set to the value of 0.50.

LightroomStatistics plug-in Relative adjustments, Adobe Lightroom, Lightrooom, relative adjustments, percentage

Why should I use relative adjustments?

The need for relative adjustment can best be illustrated by the drawbacks of the default "absolute adjustments".
The main problem with preset is that they do not take in account the current develop settings, but just overwrite them.
As you know every photo is unique. Some come out of the camera a little over exposed, others under exposed. That counts for all settings.
Say we apply a couple settings like the "Lightroom Aged photo" preset. This would mean that the following settings would be applied to all select despite their current setting: Blacks = -15, Clarity = 0, Contrast = 0,Exposure = 0, Highlights = 0, Shadows = 0, Whites = 0, ...
If you have adjusted the individual photos for these settings, after the application of the preset, or an individual setting, all the photos have the same value for the setting(s).
Applying the same "Lightroom Aged photo" preset relative would mean that all photos would have a -15 substracted of the Blacks value and for all other settings the photo would be unchanged, because these have the value of zero.

Screenshots

Main screen

Preset folder & Preset

Choose the preset folder and the preset from it.
This is the preset that will be applied.

Method

You can apply a preset either relative or absolute. With relative the settings within in the preset will be added to the current value of the photo. This can either be as a value or as a percentage. When choosing absolute, the preset will be applied as is, so overwriting the current value of the photo. This is how Lightroom also works.

Factor

The value in the preset is multiplied by the factor. 100% means multiplication with 1.0, 50% means multiplication with 0.5.
If the preset contains Exposure 0.50 and the factor is 50%, the values applied will be 0.5 * 0.5 = 0.25.
Combined with the method, this 0.25 can either be added or written directly.

Create virtual copy

When checked, the plugin will first create a virtual copy of the photos selected and then apply the preset to this virtual copy.
This is a great way to either test the results or when you would like the original photo also.

When original value is negative inverse the calculation

The default behavior of the plugin is to add the preset value. 1.0 + -0.2 = 0.8 and -1.0 + -0.2 = -1.2.
Checking this option will subtract instead of add the preset value, when the value of the photo is negative.
So 1.0 + -0.2 = 0.8 and -1.0 - -0.2 = -0.8.

Run in simulation mode

With this option checked the plugin will calculate and report the changes it would make without applying them to any photo.

JavaScript enabled in report (Better looking, but slower with large reports)

The plugin used JQuery and the Datatables JavaScript libraries. With these the reports looks much better, however, on very large reports these libraries take some time and you might run into a warning that the script is running to long.
Disabling the these JavaScript libraries increases the time for the browser to render the report much.

Select virtual copy views

See Lightroom 5 known error below

Check for invalid values

See the explanation below.

Show results upon finish

When set, the plugin will open the report in the browser after it finishes.

Show photo settings

When checked, the report will contain for each photo the before and after settings value. Otherwise this information is not reported.

Show unchanged photo settings

When checked, all the settings of the preset will be listed on each photo. Also if the values before and after the preset are the same.

Show preset value

When checked, the preset contents are listed in the report.

Select views virtual copy

See Known error of Virtual copies in Lightroom 5

Configuration settings

On the configuration panel of the plug-in you can specify your default settings.
You can find the configuration panel via the Plug-in manger (menu File -> Plug-in manager) and choose the Relative adjustments plug-in and open the "Configuration" tab.

See the Quick guide for explanation of these options.

For an explanation of the option, see above.

Limitations

By nature not all develop settings can be applied relative.

These settings, but not limited to, can not be applied relative:

Point curves, RGB, Red, Green and Blue
All turn on/off of the panels
All local adjustments tools like Crop Overlay, Red Eye Correction, Spot Removal, Graduated Filter and Adjustment Brush.
All settings which can be turned on/off like "Enable Profile Corrections", ...
All settings like Camera profile etc.

Known errors

1) Lightroom 5 creating virtual copies

The Lightroom plug-in API has a bug. This makes that the behavior of the "Create Virtual copy" function in some views does not work correct. (Library-Grid, Library-Loupe and Develop).
I tested it on 3 different machines, both Mac OS X and Windows, and on each machine the function failed, yet the situation being different. And on all machines it runs in at least one view well.

The bug is: when multiple photos are selected and Virtual copies should be made that in some views (Library-Grid, Library-Loupe and Develop) only 1 virtual copy is created and not for all. This bug has been reported.

To help you determine in which views the "create virtual copy" functionality runs fine an extra test program is added, see "Test Virtual copy" in the plug-in menu.

How to run the test?

Select between 2 and 10 photos and run the test in all the three views"Library-Loupe, Library Grid and Develop module.
Determine in which situation the virtual copies are created correctly.

Please run the plug-in in the view that works fine for you.

2) Synchronization problem in the Lightroom API

When applying Auto-tone the Lightroom API (Application programming interface) will not always report the correct values directly for the sliders in the Basic panel, like Exposure, Contrast, Highlight, Shadows etc. It might wait until it has generated all its previews. In that case reports a value of -999999 when you run this plug-in before it has finished. This report has been filed with Adobe.
In the meantime a workaround is implemented in the plug-in: the option "Check for invalid values".
Default this option is turned off, however when you experience that a photo is not altered and in the log you find the values -999999, then you should turn in that case this option on.

3) Exposure percentage change with the XML format

Default percentage notation

By default 50% is written as 50 in the preset. You can set the slider on 50 and create a preset.
Almost all sliders have a range from -100 to 100, so creating a preset with 50 is easy.

HOWEVER for Exposure there is a problem.

The range of the Exposure slider is from -5 till 5. If you want to create a preset for 50% you can't set the slider to 50.

Until Lightroom 7.3 one could for example set the percentage for Exposure to 50 by editing the preset file, although the range of the setting in the tool is from -5 till 5.
However with the transition to the XML versions of the presets, the Adobe Lightroom API (Application Programming Interface) ignores values outside the range between the minimum and maximum value.

So for Exposure when you want to apply 50% you have to write 50% as 0.5. So set the slider to 0.5 and save it as a preset.

Resources

Relative adjustments

Creating preset

Background info

Let's take the Lightroom "General - Punch" preset as an example.
We have three photos, each already develop and have their individual adjustments, see column "Setting" and "Current value".
What would happen it we applied the Lightroom "General - Punch" on these three photos?
"General - Punch" has: Clarity=30, Vibrance=25.

Absolute adjustment; with or without factor

Photo	Setting	Current value	Preset value	New value factor 100%	New value factor 50%	New value factor 150%
Photo 1	Clarity	12	30	30 * 100% = 30	30 * 50% = 15	30 * 150% = 45
	Vibrance	16	25	25 * 100% = 25	25 * 50% = 12	25 * 150% = 37
Photo 2	Clarity	-20	30	30 * 100% = 30	30 * 50% = 15	30 * 150% = 45
	Vibrance	26	25	25 * 100% = 25	25 * 50% = 12	25 * 150% = 37
Photo 3	Clarity	5	30	30* 100% = 30	30 * 50% = 15	30 * 150% = 45
	Vibrance	10	25	25 * 100% = 25	25 * 50% = 12	25 * 150% = 37

*Settings values will be rounded by Lightroom automatically.

Relative adjustment - add value - with or without factor

Photo	Setting	Current value	Preset value	New value factor 100%	New value factor 50%	New value factor 150%
Photo 1	Clarity	12	30	12 + (30 * 100) = 42	12 + (30 * 50%) = 27	12 + (30 * 150%) = 57
	Vibrance	16	25	16 + (25 * 100) = 41	16 + (25 * 50%) = 28	16 + (25 * 150%) = 53
Photo 2	Clarity	-20	30	-20 + (30 * 100) = 10	-20 + (30 * 50%) = -5	-20 + (30 * 150%) = 25
	Vibrance	26	25	26 + (25 * 100) = 51	26 + (25 * 50%) = 38	26 + (25 * 150%) = 63
Photo 3	Clarity	5	30	5 + (30 * 100) = 35	5 + (30 * 50%) = 20	5 + (30 * 150%) = 50
	Vibrance	10	25	10 + (25 * 100) = 35	10 + (25 * 50%) = 22	10 + (25 * 150%) = 47

*Settings values will be rounded by Lightroom automatically.

Relative adjustment - add percentage - with or without factor

Photo	Setting	Current value	Preset value	New value factor 100%	New value factor 50%	New value factor 150%
Photo 1	Clarity	12	30	12 + (12 * 30%) = 15	12 + ((12 * 30%) * 50%) = 13	12 + ((12 * 30%) * 150%) = 17
	Vibrance	16	25	16 + (16 * 25%) = 20	16 + ((16 * 25%) * 50%) = 18	16 + ((16 * 25%) * 150%) = 22
Photo 2	Clarity	-20	30	-20 + (-20 * 30%) = -26	-20 + ((-20 * 30%) * 50%) = -23	-20 + ((-20 * 30%) * 150%) = 29
	Vibrance	26	25	26 + (26 * 25%) = 32	26 + ((26 * 25%) * 50%) = 29	26 + ((26 * 25%) * 150%) = 35
Photo 3	Clarity	5	30	5 + (5 * 30%) = 6	5 + ((5 * 30%) * 50%) = 5	5 + ((5 * 30%) * 150%) = 7
	Vibrance	10	25	10 + (10 * 25%) = 12	10 + ((10 * 25%) * 50%) = 11	10 + ((10 * 25%) * 150%) = 13

*Settings values will be rounded by Lightroom automatically.

Conclusion

When you apply a preset absolute (default Lightroom) of several photos, they will all have in the end the same settings. Lightroom applies them "absolute".
Applying preset absolute (default Lightroom) will disregard the current settings. Like photo 2, looking good with Clarity -20 will at the end have +30, an increase of 50, while photo 1 only increased +18.
Probably photo 2 has much to much Clarity.

More information

Soft proofing

Soft-proofing is the capability to preview in how onscreen photos appear when printed, and optimize them for a particular output device. Soft-proofing in the Lightroom lets you evaluate how images appear when printed, and adjust them so that you can reduce surprising tone and color shifts. Source Lightroom help.

Soft proofing lets you temporarily simulate how an image will appear on another device, such as a printer, by using only a computer monitor. This can be a helpful tool for making more predictable prints — and is perhaps one of the most useful applications of color management. However, it also requires a trained eye, in addition to knowing how to correct an image if it doesn't appear as intended. Source Cambridge in Coulor

Download Plugin
(Version 2.93)

Pricing and Payment

You may download and try the plugin for free, subject to its trial limitations. To unlock the full functionality you will need to purchase a copy.

Payments may be made via Credit Card or PayPal, and are securely processed via our payment partner - Paddle.

€15.00

Note that VAT will be added for European customers.

Approx:

US $	17.07
UK £	12.99

Buy Now

Lost your registration?

Relative adjustment plug-in

Contents

YouTube demo

Note on setting the percentage adjustments

Preset folder & Preset

Method

Factor

Create virtual copy

When original value is negative inverse the calculation

Run in simulation mode

JavaScript enabled in report (Better looking, but slower with large reports)

Select virtual copy views

Check for invalid values

Show results upon finish

Show photo settings

Show unchanged photo settings

Show preset value

Select views virtual copy

Configuration settings

1) Lightroom 5 creating virtual copies

How to run the test?

2) Synchronization problem in the Lightroom API

3) Exposure percentage change with the XML format

Relative adjustments

Creating preset

Absolute adjustment; with or without factor

Relative adjustment - add value - with or without factor

Relative adjustment - add percentage - with or without factor

Soft proofing

Pricing and Payment